P-Easy is a professional narrow band data radio modem for safe industrial data transmission.

It provides a considerable number of PLC-protocols to ensure simple incorporation of networks. During development easy use was taken in account. Therefore all parameters can be read off the display and all settings can be done via four function keys. The operating condition of P-Easy and it’s aerial system are transparent at a glance, as all operating parameters are indicated with green bars. If results differ from the recommended operating range, they are displayed in red color.With only two P-Easy radio devices, plus compatible aerials and power supply, easy measurement of radio paths is possible. Besides field strength several other connection relevant measurement parameters, like data quality and bit error rate, can be read directly on the big, clear color display. Certainly P-Easy-Config, an easy to operate configuration software is included in the delivery that enables the comfortable offline configuration of your P-Easy. At the push of a button all stages of installation can be prepared, connections can be tested and all parameters can be modified by radio in the remote units. If required the optional P-Easy-NetMonitor or P-Easy-NetOptimizer can be ordered, that outline the current state of your data communications at all times.

application area

• Telemetry & SCADA

• water-, gas- and energy supply

• vaste water systems

• pipelines

• crude oil and natural gas extraction

• mining

• environmental-, hydro- and meteorological systems

• money transfer networks- POS-terminals, betting-terminals

• safety and monitoring

advantages

• big color display for all operating parameters and self diagnostic

• big range (up to 70 km and without the need of direct sight)

• permanent networks with point to point-, point to multipoint- or multipoint to multipoint- networks

• various industrial protocols (Modbus, IEC870, Profibus ...) implemented

• bit rate up to 19.200 bps in 25 kHz data channel, switchable to 9.600 bps for greater range

• adjustable power: 0,01-5 W

• Ethernet10/100 MBit

• RS232

• RS422/485

• high mechanic stability

• installation on DIN-bar

• complies ETSI EN 300-113-1, EN 300 113-2, EN 301 489-5, EN 60 950, EN 50 385

• Simple use Windows-software for configuration, modulation and diagnose for free
  

• optional network monitor or network optimizer available

technical parameters